launch x431

This article is about how to perform Mercedes Benz 4th Generation Gearbox clone with Launch X431 PAD V / Pad VII Plus X-PROG3 GIII (update software to Immobilizer programmer V10.06) Here we go for the operation guide: 1. Select the Anti-theft programmer software, click [OK] -> [OK] to enter. 2. Connect the Immobilizer programmer as shown in Figure 1, and select 【Gearbox】-> 【Benz】-> 【VGS-NAG3】 3. The current Read/Write data volume is large. To improve communication stability, please use the USB for connection. 4. Click “OK”, please perform the [Connect] function first. 5. Select 【View Wiring Diagram】, disassemble the original gearbox and connect the Immobilizer programmer with harness. 6. Before performing operations of other functions, please first perform the [Connect] function to verify whether the gearbox is connected to the programmer. 7. Click [OK] and then click [Backup complete data] a...

How to Get Launch X431 PAD V PAD VII Truck License

Launch X431 Pad VII / PAD V not only do gasoline cars but also diesel heavy-duty trucks. Truck software is required to be purchased seperately. How to purchase heavy duty software? Software license and heavy duty adapters kit can is available here: https://www.obd2tool.com/goods-10498-Launch-Heavy-Duty-Truck-Software-License-and-Adapter-Set.html Contains : 1. Heavy Duty Truck Software License (Online activation) 2. 1 set adapters for trucks How to activate heavy duty license? After purchase software, go to Local Diagnose – Store– Commercial Vehicle (HD) software activation/renewal Press Subscription Renewal Card and follow instructions to complete activation. NOTE: Cannot perform Heavy-duty programming, only diagnosis.

ISUZU C07104B Steering Angle Sensor Center Position by Launch X431 V+ Pro3

Problem : When I start my ISUZU DMAX 2016, it does not work normally. A few dashboard displays will appear. I'm trying to use X431 V+ to diagnose it and solve the problem. I select ISUZU software and search automatically, it says this function only supports models since year 2008 at the moment. Please enter the test from the year model menu for the previous models 2008. I click OK to go to the system selection page and select ABS/ESC/AEBS to read the fault code, read fault code C07104B which means that the center position of the steering angle sensor is invalid. Then I clear the fault code, it shows that the fault code has been cleared, but when I read the fault code again, the fault code is still on the screen. How to deal with it? How-to-Solve-ISUZU-C07104B-Steering-Angle-Sensor-Center-Position-by-Launch-X431-V+-Pro3-2 Obd2tool.com engineer replied: After reading the fault code by X431 Pro3, go to Special Function-> Learning for Steering Central Position Then click ‘Clear’ ...

Powered by Blogger